UID378724
威望1
金钱30394
交易诚信度2
主题14
帖子338
注册时间2007-1-29
最后登录2024-5-10
中级会员
交易诚信度2
注册时间2007-1-29
|
楼主 |
发表于 2023-6-19 22:37
|
显示全部楼层
HIMD使用方法如下:
To enter HiMD mode in WebMinidisc, you need to:
Connect the HiMD device to the computer, while it's in MD mode (either with a regular MD inside, which has at least one track, or just set to MD disc mode and without a disc)
Connect it to WebMinidisc, as you would do if you wanted to use normal NetMD mode.
Open the '3 dots' menu, select settings, then 'enable homebrew mode shortcuts', then close the settings (this step needs to be done only once)
Open the '3 dots' menu, select homebrew shortcuts, then 'switch to unrestricted HiMD mode'
At this point, you'll see Web Minidisc's loading screen, then a 'Loaded.' dialog will appear. After closing the dialog you'll be put back at the 'connect' screen.
--- At this point the exploit is already loaded onto the device and it will stay loaded until the device goes to sleep, unplugging the USB cable will not erase the exploit ---
Insert a HiMD disc (either a HiMD formatted MD with at least one track, or a blank one with the device set to HiMD mode)
(Windows only) Install Zadig again for this new HiMD device. It should have 0x5341 as the VID.
Click the downwards-pointing arrow next to the connect button, then select HiMD (Unrestricted). A WebUSB dialog will appear. Select your device, then wait.
Done. You can now upload AT3/3+/PCM/MP3 audio
Known bugs (and temporary mitigations) - they will be fixed in the final version:
Out of the box, the selected encoder is 'atracdenc', which doesn't let you convert ATRAC3+, but the UI will still have AT3+ selected as the default. Fix: Please select the remote encoder in the settings.
Full width support is broken - the concept of full width titles doesn't exist in HiMD. Fix: If you want to name a track using Japanese characters, you'll have to do it after the upload. |
|